Canon Info

Profiles

Custom Profiles 2021

Drivers, Sofware, and Manuals

Pro-6000 Drivers, Software, and Manuals Downloads

Pro-4000 Drivers, Software, and Manuals Downloads

Pro-1000 Drivers, Software, and Manuals Downloads

Online Manual

Web UI

Pro-6000

https://192.168.1.60/rui/logon_manager.html
Password: T44MT1035

Pro-4000

https://192.168.1.40/rui/logon_manager.html
Password: BADE00129

Automatic Banding Adjustment (Paper Feed Adjustment)

From https://support.usa.canon.com/library/ij/Manual/All/PRO-4000/EN/UG/ug_paperfeed01_0102.html:

If printed images are affected by banding in different colors across the sheet, execute Adjust print quality for automatic adjustment of the paper feed amount. The printer prints and reads a test pattern for automatic adjustment of the feed amount.

Tip

Always check the Set priority values.

Selecting Feed Amount Adjustment Method

There are two methods of adjusting the paper feed amount, Prioritize print quality and Prioritize length accuracy, either of which will be applied during printing. Since the method that is applied during printing is determined from the value of the Set priority setting, configure Set priority to match the print target.

Follow the procedure below to perform settings.

  1. Load paper.
  2. Tap HOME screen then tap Maintenance.
  3. Tap Paper feed adjustment.
  4. Tap Set priority.
  5. Tap paper to adjust.
  6. Tap setting “Prioritize print quality”
  7. Tap OK on displayed screen.

Follow the procedure below to adjust.

  1. Load paper
  2. Tap HOME then tap Maintenance.
  3. Tap Paper feed adjustment.
  4. Tap Adjust print quality.
  5. Tap Auto.
  6. Tap paper to adjust.

A test pattern is printed for adjustment and adjustment is finished.

Tip

If additional fine-tuning is necessary, execute Paper feed fine adjustment.

Paper Calibration

Use the Canon Device Manager to check paper calibration status and run paper calibration